25 HP dry-land rototiller

Machine Introduction:

The frame design is reasonable, using thickened steel plates, which are sturdy and durable, reducing the vibration generated by the engine and extending the machine's lifespan.

The engine adopts a 25 HP Changwu engine.

Adopt customized full-gear gearbox, the front of which is the walking gearbox has a total of 3 forward gear, 1 reverse gear, and the back is the working connection box, which can be matched with a large number of farm tools such as rotary farming and ditching

The driving wheel is made of steel through heat treatment, which is sturdy and wear-resistant.

The machine adopts the design of one single side with 1 driving wheel and 4 supporting wheels, and a tensioning wheel. The tensioning wheel and the supporting wheel is produced by CNC machining center. The diameter is increased and the edge is thickened.

Two steel bearings and rubber oil seals are installed in each wheel to enhance the flexibility of the wheel. The oil seal can prevent impurities such as soil from entering the wheel and extend the service life of the wheel.

The sheet metal parts of the machine are made of thickened steel platesof T6 or above, which are sturdy, durable, and not easily deformed.The surface is painted by high-quality spray powder, with strong adhesion, and there will be no paint peeling or rusting.

The left and right steering adopts a pull rod mechanism, which is easy to operate and not easily damaged or malfunctioning.

The track is composed of rubber, steel wire and iron skeleton. The track has a large area attached to the ground, strengthens the friction force, makes the steering and walking more flexible, and does not cause problems such as rollover and tilt.

The addition of 750w all-copper generator can ensure that the machine will not be unable to start the battery due to power shortage, thus extending the service life of the battery.

The air filter adopts oil type, which can effectively filter the dust and soil generated during the operation of agricultural tools, ensuring the normal operation of the engine and extending its service life.

The circuit is made of all copper wire with multiple fuses, and it is easy to operate in the form of a plug. The outer part of the circuit is protected by a thick plastic soft shell, which will not cause aging or damage to the circuit, resulting in short circuits.

The installation of the line is fixed by tools such as iron clips and wire ties, ensuring stable installation and preventing detachment.

Overall dimensions:	2350x930x1140	Standard configuration dimensions
Diesel engine products:	Chang Wu 25M	Rotary tillage:	900x400(length x width)
Engine speed:	2200	Weeding:	900x400(length x width)
Overall weight:	780KG	Backfilling:	900x400(length x width)
Fuel consumption:	1L/mu	Trenching:	300x300(depth x width)
Walking speed:	10Km/h	Bulldozer shovel:	900x300(length x width)
Working speed:	1-2mu/h
Gearbox:	Customized gearbox
Gear position:	Fourgears (three forward gears, one reverse gear, with high and low speeds)
Tracks:	It is composed of rubber, five layers of steel wire, and an iron framework, which is not easy to deviate and not easy to derail (Reasons: 1. There is a guide rail, 2. There is an added tooth ruler)
Air filter:	Oil needs to be added, with a height of approximately 1cm-2cm.The dust in the air filter must be cleaned up every day. After cleaning, add 1cm-2cm of engine oil to the air filter.
Water tank:	Water should be added when the water float reaches one-third of the position, otherwise it may damage machine parts and reduce service life.
Transmission mode:	Gear transmission
Optional functions
Fertilization:	Fertilization, trenching and backfilling integrated machine, with a depth of 0-35CM. The fertilizer hopper can hold about 25 kilograms of fertilizer.
double share plough:	0-20cmPlowing depth 0-20cm.
Ridging:	The maximum height of the upper ridge surface is 30CM, the maximum height of the lower ridge surface is 50CM. You can also adjust the ridge surface, height, and width according to your own needs.