Machine Introduction:
The frame design is reasonable, using thickened steel plates, which are sturdy and durable, reducing the vibration generated by the engine and extending the machine's lifespan.
The engine adopts a 36 HP Changchai, 35 HP Changwu or Yuchai.
The 35-36 horsepower adopts a ductile cast integrated gearbox, which has three forward gears and one reverse gear for both travel and rear power output in the same gearbox.
The power output is divided into forward and reverse rotation.
The working gearbox adopts full gear transmission to drive the operation of agricultural tools.
The driving wheel is made of steel through heat treatment, which is sturdy and wear-resistant.
The machine adopts a single side design with 1 driving wheel, 4 supporting wheels, 1 top wheel, and 1 tensioning wheel. The tensioning wheel of the supporting wheel is produced by a CNC machining center, increasing the diameter and thickening the wheel edge.
Two steel bearings and rubber oil seals are installed in each wheel to enhance the flexibility of the wheel. The oil seal can prevent impurities such as soil from entering the wheel and extend the service life of the wheel.
The sheet metal parts of the machine are made of thickened steel platesof T6 or above, which are sturdy, durable, and not easily deformed.
The surface is painted by high-quality spray powder, with strong adhesion, and there will be no paint peeling or rusting.
The left and right steering adopts a pull rod mechanism, which is easy to operate and not easily damaged or malfunctioning.
The track is composed of rubber + steel wire + iron skeleton. The track has a large area attached to the ground, strengthens the friction force, makes the steering and walking more flexible, and does not cause problems such as rollover and tilt.
The addition of 750w all-copper generator can ensure that the machine will not be unable to start the battery due to power shortage, thus extending the service life of the battery.
The air filter adopts oil type, which can effectively filter the dust and soil generated during the operation of agricultural tools, ensuring the normal operation of the engine and extending its service life.
The circuit is made of all copper wire with multiple fuses, and it is easy to operate in the form of a plug. The outer part of the circuit is protected by a thick plastic soft shell, which will not cause aging or damage to the circuit, resulting in short circuits.
The installation of the line is fixed by tools such as iron clips and wire ties, ensuring stable installation and preventing detachment.
(Compared to 18.25 HP, it has the advantages of: 1. large power and high work efficiency2. Hood is available for choice, which can effectively protect precision components such as the engine. 3. Significant effect of rotary tillage, etc. 4. Increase the operating space, making it easier to get started and smoother to operate.)
Overall dimensions: | 2700*1000*1200 | Standard configuration dimensions | |
Diesel engine products: | Horizontal bar Chang Wu | Rotary tillage: | The width of rotary tillage is 90CM, and the fender is 1 meter. The depth of rotary tillage is 0-25CM (If there’s special requirements, the tool can be extended by 1.2 meters, and the depth can reach about 30CM) |
Engine speed: | 2200 turn | Weeding: | Weeding width 90CM, weeping by scraping up the upper layer of the earth |
Overall weight: | 850kg (with shovel) | Backfilling: | Soil collection width 150CM |
Fuel consumption: | 1-2L/mu | Trenching: | Trench width 30CM, depth 0-35CM, 400 meters per hour |
Walking speed: | The fastest 10 KM/h | Bulldozer shovel: | Width of one meter, height of 30CM, dual hydraulic cylinders |
Working speed: | Normal 2-3mu/h | ||
Gearbox: | Customized gearbox | ||
Gear position: | Four forward gears, one reverse gear | ||
Tracks: | It is composed of rubber, five layers of steel wire, and an iron framework, which is not easy to deviate and not easy to derail (Reasons: 1. There is a guide rail, 2. There is an added tooth ruler) | ||
Air filter | Oil needs to be added, with a height of approximately 1cm-2cm.The dust in the air filter must be cleaned up every day. After cleaning, add 1cm-2cm of engine oil to the air filter. | ||
Water tank: | Water should be added when the water float reaches one-third of the position, otherwise it may damage machine parts and reduce service life. | ||
Transmission mode: | Full gear transmission | ||
Optional functions | |||
Wheat seeder: | Line 5, line 6, line 7, line 8 | ||
Ridging: | The maximum height of the upper ridge surface is 30CM, the maximum height of the lower ridge surface is 50CM. You can also adjust the ridge surface, height, and width according to your own needs. |
Online consultation
Focus on us
Contact phone
Back to top